Used car brand process
Universal crusher is suitable for pharmaceutical, chemical, metallurgy, food, construction and other industries. It can process hard and hard materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc. It can also be used as the supporting equipment before the processing of micro crusher and ultra-micro crusher. Its powder collecting chamber adopts fully enclosed noise reduction structure, which can effectively reduce the working noise. The machine is equipped with a cooling device to reduce the temperature and work more smoothly. The motor speed of the machine is 5000 RPM. The machine is made of lcr18Ni9Ti stainless steel material, with strong wear and corrosion resistance characteristics, suitable for processing advanced and corrosive materials. The machine adopts the impact crushing method, so that the material into the crushing chamber, by the high-speed rotary six movable hammer impact, through the gear ring and the material collision with each other and crushed, crushed material with the help of air flow, through the sieve into the powder bag, leaving no residue. It has the advantages of high efficiency, low noise, reliable work performance and product quality, safe operation, drug hygiene and low loss.
1. Before using the universal jet mill, check whether all fasteners of the machine are tightened and whether the belt is tightened.
2. The running direction of the spindle must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may be caused.
3. Check whether the electric appliance of the mill is complete.
4. Check whether there are metal and other hard sundry objects in the crushing room of the mill, otherwise it will break the knife tool and affect the operation of the machine.
5. The purity of the material must be checked before crushing, and no hard metal sundry is allowed to mix in, so as not to damage the dao tool or cause combustion and other accidents.
The oil cup of the crusher should be frequently injected with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before shutdown, if not continue to use, to remove the machine left behind.
8. Regularly check whether the screen is damaged. If there is damage, it should be replaced immediately.
9. When using, if the crusher will have small vibration, be sure to tighten the handle connecting the cover to avoid accidents.
JXM Series Univeral Jet Mill,Universal Pulverizer,Universal Grinder,High Effective Jet Mill Shandong Jing Xin Powder Equipment Technology Co., Ltd. , https://www.jxpowder.com
　　
The first step: transaction - fill in the transaction transfer form
　　
The second step: vehicle inspection - holding the transfer form filled in when the transaction is done, came to the extension number window, and then the vehicle extension number, camera, after the completion of these two procedures, mainly check the engine number and shelf number Conformity with the original car, the vehicle is suspected of stealing and so on.
　　
The third step: the selection number - because the used car does not allow the selection of personalized license plates, so you can only use the five-choice selection method.
　　
Step 4: Replace the license plate - After the number is selected, you only need to take the old license plate for a new one, and then you can put on the inspection mark and you can go on the road.
　　
After the implementation of the new regulations, the procedure for re-issuing used plates for re-registration of used cars is simple. From the original five working days to the present two working days, the relevant expenses that the owners need to pay have also been reduced by more than one hundred dollars. This will not only make it easier for the owner, but also prevent the emergence of used car dealers who use the number plate for profit.
　　
If you want to sell your old car and continue to use your own license plate number, you can also apply for keeping the original number. However, according to the relevant regulations, the following three conditions must be met:
　　
1. The original owner shall file an application within 6 months after applying for transfer registration or cancellation of registration;
　　
2. The motor vehicle owner owns the original motor vehicle for more than 3 years;
　　
3. The road traffic safety violations and traffic accidents involving the original motor vehicle have been handled. Otherwise, the original vehicle number cannot be used.