Safety precautions for tanker trucks
In the driving process of a tanker truck, it is inevitable that a variety of failures will suddenly appear, resulting in compulsiveness. The vehicle must be parked on the roadside, if the driver does not place some warning on the roadside where the vehicle is parked. When the sign is on, it will directly affect the accurate judgment of the passing vehicle in the past. When the tanker fails on the highway, the vehicle is parked in a location that is not adequate, and the resulting traffic accident is unthinkable. For example, the practice of parking oil tankers at the toll stations, gas stations, and service areas with relatively high traffic volume is extremely inappropriate. When parking a tanker, it is also necessary to pay attention to whether or not there are local villagers choosing to cross the isolation belt and isolation network because they are near the road. This will not only disturb the traffic order, but also will cause traffic accidents. Your own life is not responsible. 1. If there is a vehicle failure during the journey of the tanker on the way, it is necessary to stop the vehicle when it is necessary to stop and handle the vehicle, and it will not affect other vehicles normally driving on the freeway. The parking position is in the direction of several tens of meters, with a prominent warning sign, or the warning light of the tanker is turned on. If such a situation occurs at night, the rear lights and the wide lights of the tanker are also required. All open. 2. The tanker highway or some road sections in rural areas are in trouble. You need to fight the 12-point mentality. Observe the surrounding vehicles and the pedestrian dynamics. To slow down the speed, you must have high Eight degrees of vigilance to avoid accidents. 3, if the tanker is in the process of driving, the tire is leaking, puncture, need to tightly control the steering wheel, the vehicle speed slowly reduced, can not be an emergency brake. Fully control the driving direction and drive the tanker as soon as possible. When changing the tanker's tires, warning signs should be prevented from properly handling the tires. The central motor we are referring to here is a central Ebike Motor used on lithium-ion assisted Electric Bicycles, while the common one is the motor used on lithium-ion mountain assisted bicycles. It was developed and put into use after the hub motor, and compared to the hub motor, the technology of the central motor is not yet very mature, so there is still a long way to go in terms of performance stability. But the central motor has a characteristic that hub motors do not have, which is its instantaneous starting assistance function, so it also has a corresponding market. The most common method is to install a center mounted motor on a mountain Electric Bike to meet the bumpy road conditions in the mountains, so both hub motors and center mounted motors have their advantages and disadvantages. The choice of motor depends entirely on which aspect of its functionality you value.Generally speaking, the central motor is used to assist mountain bikes, and hub motors are more common on urban series of assist bicycles. Electric Bicycle Motor ,Mid Motor,Ebike Motor Ejoysport Technology (SuZhou)Co.,LTD , https://www.yqejoysport.com