Novice, please see here

Novice, please see here

Adding a private prefix in front of the car, the feeling of exclusive ownership is always gratifying. There is also a lot of people who own a private car and they have always struggled. However, many people do not understand the car even if they buy a car. There are always many questions on the road. If you do not solve these questions, you may become the killer on the street. Here are some common confusions for newcomers and help you to spend the novice time safely.

One question: What should I do if the fault lights are on? Are the vehicle's major assemblies operating in harmony? Are all the internal organs in the vehicle healthy and normal? The various fault lights will show up in a timely manner like a barometer. For example, when the water temperature light is not on at a high speed, the water temperature light is low and bright, which indicates that the water tank is short of water, the water level sensor is malfunctioning, or the cooling fan does not turn. This involves mechanical and electronic circuit faults. For another example, if the engine fault light is on, it should be stopped immediately for expert inspection and exclusion. In short, it is necessary to clearly remember all kinds of fault light signs and not to be able to bear a crown.

Second question: What to do when running at high speed to the right Because of the need for road drainage, the road surface has a low slope on the middle high side at the time of design and construction. Therefore, as long as there is no deviation in the range of the vehicle speed and distance specified by the manufacturer, it is a normal phenomenon and the owner need not worry.

Three questions: how to do with dim lighting affecting lighting Some vehicles have long-term use, the lights in the front and rear of the car will appear dim, and some consumers think that the lights are yellow, aging problems should be replaced, but it may also be stains into the glass cover of the lights Without having to replace it. If this problem occurs, you can wipe the bulb with alcohol to eliminate fingerprints and oil.

Four questions: how to do automatic transmission of vehicle power abnormalities Automatic transmission vehicles suddenly appear high engine speed, but the speed is "indifferent", indicating that the transmission within the oil circuit, friction plate, sensor problems, should go to a professional maintenance station inspection. In general, oil leakage from the gearbox sensor connector only needs to replace the sensor. In addition, beware of road shops leaking oil pan oil lie leaks and sky-high prices.

Five questions: how do the engine has a crisp knocking sound as the car's "heart", the engine capacity can not have the slightest exception. The normal operation of the engine is accompanied by a crisp knocking sound. Most of the engines are faulty in the engine and should be sent to a professional workshop for repair as soon as possible. If you continue to use it for adventure, you will undoubtedly lose a lot of money.

Six questions: How do the direction booster be stiff? The direction booster is controlled by the computer module. Once there is a problem, the computer will automatically cut off the control. Therefore, if you find that the steering wheel is stiff, and the fault warning light is on, you mustn’t be forced to pull hard and you should promptly consult an expert or conduct a professional inspection.

Question 7: What happens to the "squeaking" noise when braking? When braking, there is a slight noise due to the friction of the brake discs. If the sound can be heard clearly, there are generally two reasons: First, the car just bought soon, there are hard spots on the brake pads, as long as more running, worn out this point is okay; Second, the brake wear Seriously, there is no friction layer, and there is a case where the iron touches the iron. At this time, the brake platter should be replaced as soon as possible.

Question 8: Sometimes the car keys don't move. What to do? Similar situations affect more female owners or novices. One of the reasons is that the lock cylinder is damaged. Most of the locks are self-locking. Just use the steering wheel and turn the key slightly. Can also ask the old driver around to help. If it does not work, ask a professional to rule it out.

Question 9: How does the wiper blade produce abnormal vibration? Due to frequent use of the wiper blade, the wiper blade of the vehicle often experiences abnormal vibration. If you go to a 4S store, you will be told to replace the wiper blade. It is not worthwhile. If the above problem occurs, use pliers to reduce the clearance between the joints of the wiper blade and the clamp rubber sheet, and check whether the rubber of the wiper blade is deteriorated. If it is aging, it must be replaced.

Ten questions: how to do when the engine starts abnormally in the early hours of start-up Many car owners start the car in the morning and then drive on the road. As a result, it is found that the engine of the vehicle shakes very badly. This may be because some cylinders do not work well, the valve is not closed tightly, and the oil is not reached. The best working temperature. You can run for a while at high speeds on the 3rd or 4th speed. If you still haven't eliminated it, you have to send it to the auto repair factory for inspection.

Iron Alloy Powder

Iron-based laser cladding powders are used in the laser cladding process, which is a technique used to apply a protective coating or build up a desired shape on a metal surface. These powders consist of iron as the main component, along with other alloying elements to enhance specific properties.

Iron-based laser cladding powders typically have a controlled particle size distribution and composition to ensure optimal performance during the laser cladding process. They are designed to have good flowability and excellent metallurgical bonding with the substrate material.

SS Powder,316L Powder,Steel Powder,Stainless Steel Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtclasercladding.com