Cordless Heat Gun Rated Voltage Cordless Mini Heat Gun
Nickel-based Laser Cladding Powder is a type of powder material used in laser cladding processes. Laser cladding is a technique that involves using a high-energy laser beam to melt and fuse a powdered material onto a substrate, creating a protective or functional coating. Ni Based Powder,Inconel 718 Powder,Nickel Base Powder,Inconel 625 Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.egretgeotools.com
Cool down mode with automatic shut-off
Independent temperature and air flow control
Automatic and constant temperature adjustment independent of voltage fluctuations and environmental conditions
Easy and comfortable to use
Automatic shut-off when carbon brushes are worn to prevent expensive damages
Additional heater tube sleeve helps prevent burns during use
Electronic protection of heating element
Construction site tested and suitable for outdoor use
ZX1600
ZX3400
1.Power cordÂ
Voltage(V) : 42 100 120 200 230 For 50/60Hz
Voltage(V) : Â 200 230 For 50/60Hz
2.Main switch 3.Screw on the clamp
Power consumption(W) :960 1400 1600
Power consumption(W) :3400
4.Potentionmeter for temperature adjustment
Weight (kg) : 1.3 with 3m cord
Weight (kg) : 1.4 with 3m cord
5.Handle & Nozzle
Temerature : 20-700 degrees Celsius,infinitely controlled
6.Air fillter
Air flow (1/min) :max.230
7.Rubber stand
Air pressure (pa) :3000 (30mbar)after about 24 h operating timeÂ
8.Adapter tube
Size (mm):customized
9.Heat protection tubeÂ
TRIAC ST
100% Swiss made quality
Some advantages are listed below:
Non-contact, flexible joining technique
Minimal thermal stress on the welded parts
Simple joining seam geometry
No particulate development
Vibration-free processing
Optically perfect welding seam
High precision
High strength
Gas-tight, hermetic seals
No tool wear
No consumables (adhesive, fasteners, etc.)
Inquiry ( pls include products psecifications & contact information ) Thanks.