Metal Steel Floor Deck Roll Forming Machine
1)Q: Do you have after sales support? Â Â Â Â 3.Good aftersales-service, its free of charge during the warranty period. Â Inquiry---confirm the profile drawings and price----confirm the PI---arrange the deposit or L/C---then OK CPE Laminate Nonwoven Fabric Machine Casting machine refers to the best equipment for making cast film. Adopt high-precision electronic ceramic casting machine and use alumina as the main raw material for ceramic casting Cpe Laminate Nonwoven Fabric Machine,Flat Film Plastic Tape Extrusion Machine,Hygienic Packing Film Machine,Cpe Nonwoven Fabric Machine Baijia Mechanical Equipment (Huizhou) Co., Ltd. , https://www.castfilmmachine.com
Floor Deck Roll Forming MachineÂ
Â
 Feeding PlatformFrame Structure : Steel Plate Welded
Roller Flatting System &Â Pre-hand cutting system
Advantage: not scratch the surface of metal plate
Â
Â
Â
Â
Â
Roll Forming M/CÂ
Machine Weight:13Tons
Installation Dimension:1500mm*1800mm*1500mm;Â
Machine Under Frame:Steel 400 H-beam;
Sidewall :Â 45# Steel plates;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Roller Stations: 28Rows ;Â
Shaft Diameter:85mm;
Side wall plate:24mmÂ
Main Shaft Material:45# steel with finish turning ;
Roller Material:45# Forging Steel with Chromium Plate;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Chromium Plate Thickness:0.05mm;
Motor Power: 15Kw*2 ,Brand Siemens;
Reducer Type:2-8#Gear Speed Reducer--- Shanghai,China
Chain Wheel and Cycle Chain :Â 1.2Â Inch;
Production Line Speed:10-12 m/min ;
Â
     Â
      PLCÂ
     Control
     SystemFunction:Adopts Quantity Cutting System,length of roof sheet can be set on the computer.
Tolerance :within 1.0mm
Frequency Converter :"Delta"
PLC is "Siemens "
Encoder: Omron
Touch Screen:"Delta "
Voltage Standard :3 Phases 380V 50Hz or according to customer's need ;
    Hydraulic Â
     PressingÂ
     Device Pressing Die Material: Cr12
Quenched treatment 58ºC-62ºC.
Length Tolerance: ±2mm;
Pump Station Motor:5.5Kw,LICHAO,SHANGHAI;
 Hydraulic oil :40#
    Hydraulic Â
    CuttingÂ
    DeviceFunction:Adopts electric drive and automatic location system to decide the dimension and cut the target .
Working Method: Stop to post then post to cut;Â
Cutting Mold Material: Cr12
Quenched treatment 58ºC-62ºC.
Length Tolerance: ±2mm;
Pump Station Motor:5.5Kw,LICHAO,SHANGHAI;
Floor deck roll forming machine packages and shipment photos showing 
Payment Method
  30% as deposit ,balance payment after inspection while before delivery.Â
Production Period:45-50 working days after the 30% deposit.
Packing Method
   Nude packing in the 40 feet container ,fixed well with oil rope, control cabinet and all the accessories with waterproof.
Warranty:12 months limited warrantyÂ
  Components and parts are free during warranty.
Installation
   If installation is needed, the seller will dispatch a technician to the buyer's factory abroad to assist regulating the machine . The buyer should assist the seller to get the Chinese technician's visa and should pay for the round trip air ticket ,local accommodation.and $100/day.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.Â
 *Position the machine in the buyer's factory.
 *Prepare necessary electric wiring. Â
 *Prepare material of trial running.
 *Provide labors for assistance and installation during installation.Â
Contact detailsÂ
Alan:0086 189 2014 6516
Our main product
A: Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
2) Q: How do your machines compare with other big companies in this market?
A: We are up to date with the latest technology and improve our machines accordingly
3)Q: How does your factory do regarding quality control?Â
A: Quality is priority.  we always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
4) Q: Do you sell only standard machines?
A: No, most of our machines are built according to customers specifications, using top brand name components
5) Q: Can you make the machine according to my design or proto type?Â
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with usÂ
6)Q: How can we be assured that you will deliver us quality machine with spare parts?Â
A:1. Customers to send the technical people to our factory for checking the quality.
    2.We can send the technicians to the buyer`s factory for the installation of the machine.Â
7)Q:What can you do if the machine broken?
    A:Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken         parts freel, but you need pay the express cost yourself. if after warranty period, we can look at negotiation to solve the                 problems, and we supply the technical support for the whole life of the equipment.Â
8:How to play order?
9:How to visit our company?
Fly to Tianjin airport: we will pick up you at the airpport.
If any questions,you can call my mobile phone at any times:0086-18920146516
mob: 0086 18920146516
Â
First, mix the pulverized powder with binder, plasticizer, dispersant, and solvent to make a slurry with a certain viscosity. The slurry flows down from the hopper and is
The scraper is scraped and coated on the solid base tape with a certain thickness, and after drying and curing, the film that becomes the green tape is peeled off from the top, and then according to the size of the finished product
Dimensions and shapes require punching, lamination, and other processing of the green belt to make a finished blank to be sintered. Low cost, high quality, non-toxic
Harmless, simple production process and other advantages
