Car engine cleaning method
If the wet cloth does not clean the dirt, try a regular detergent. If the above two methods are tried, you still cannot wipe off the dirt before you choose to clean it with water. Second, when the parts that are not wetted with water are wrapped before cleaning, the dirt is removed with a brush, water, and detergent. If you run into dirt that is difficult to remove completely, you need to use an engine-specific cleaner. It is best to choose a foam cleaner because the foam stays on the dirt surface for a long time and can break down and float off the surface. However, the chemical action of such cleaners is usually quite strong, so it should be washed with water for at least 10 minutes before it is clean. However, the following points need attention: 1. First remove dirt such as dirt or dust that can be removed with water. Always cover the parts before spraying. 2. Engine-specific cleaners should not be used for baking paint. 3. The most powerful dirt can be treated with a foam engine-specific cleaner. 4. Aluminized tank covers and exhaust pipes should be cleaned with a special cleaning agent. 5. Do not use powerful detergents first and try household detergents. 6. The dirt that solidifies due to high temperatures is the unique dirt of the engine room, and the use of special cleaning agents will be effective. Manual Food Processor,Food Processor,Rotary Egg Beater,Food Mixer Blender Cixi Jinfeng Plastics Co.,Ltd , https://www.jftoolset.com