Low Price Gas-Liquid Filter Mist Eliminator
Intergrated Design Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Integrated Design Batch Waste Plastic Pyrolysis Plant Intergrated Design Batch Waste Plastic Pyrolysis Plant,Waste Plastic Pyrolysis Plant,Rubber Pyrolysis Recycling Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
Wire mesh demister is also known as mist eliminators or sprays. This is a kind of high efficiency separation devices, used throughout all kinds of process industries, to remove liquid droplets from gas and/or vapour streams.
Wire mesh demisters uses:Chemical, petroleum, sulfate, medicine, light industry, metallurgy, machine, building, construction, aviation, shipping and environment protection. Demister pad is mainly used to eliminate streams with diameter of more than 3μm to 5μm.
Features: Simple structure, light, less pressure drop, big surface, high demisting efficiency, easy installation, operation and maintenance and long service life.
Â
1st Generation: Standard Type(98standard preparing company)
Feature: small volume, light weight, small resistance
HG5-1404-81 Exit tube type wire demister
HG5-1405-81 reducing wire demister
HG5-1406-81 full wire demister
Diameter:300-640mm, total 136 specifications
2nd Generation: Drawer type(Patent No. ZL93 2 46402.5), feature as following:
a.no need to enter into tower to clean, repair, or replace.
b.Easy clean, long life, stable performance
c.Short repairing time, low cost, simple structure
d.Blind plate can be installed to meet low load operation, increasing adaptability and application range.
3rd Generation : V type(patent no. ZL97.2.36744.6)
Besides features of 1st and 2nd generation, it also including
a.Gas and liquid has their each path, avoiding re-entrainment and increasing efficiency.
b.The V structure increases mist removing surface by 15%
c.One layer V type demister can work with same performance of 2 layers common demister, saving installation space and cost.
316L, NS-80, or F46,PP materials can be used according to customer condition.
Â
Pattern
Specification
Standard type
40-100 60-150 105-300 140-400 160-400 210-570 252-800 330-1050
Highly effective
60-100 80-100 80-150 90-150 800-400
150-300 200-400 300-600 800-400
High penetration
20-100 30-150 70-400 170-560 170-600
Absorption of shock
30-30 33-30 20-40 26-40 30-40 38-40
30-50 48-50 30-60 30-80 40-80 40-120 50-120
Pattern code number
Percentage of voids Epsilon
Volumetric weight Kg/m3
Compared to surface area m2/m3
HT-80
98.9
80
155
HT-112
98.8
112
210
HT-120
98.5
120
210
HT-144
98.2
144
275
HT-160
98.0
160
310
HT-170
97.9
170
330
HT-192
97.6
192
378
HT-300
96.2
300
575
HT-390
95.0
390
750
HT-128
98.4
128
430
HT-216
97.3
216
908
HT-432
94.6
432
1810
HTD-110
98.8
114
163
HTD-220
97.2
215
428
HTGW-135
94.8
135
1000
HTGW-195
93.0
195
1500
HTGW-160
96.7
160
5000
HTMGW-200
96.3
200
530
HTMGW-305
94.0
305
1115
HTMP-200
95.8
200
632
HTPE-32
97.0
32
360
HTPE-44.5
95.0
44.5
495
HTPE-28
96.9
28
491
HTPE-72
93.0
72
820
HTF-64
96.2
64
560
HTF-85
95.0
85
740
HTF-129
94.0
129
820
HTF-300
94.0
300
1800
Â
