Boiling Cooling Bed for Sand Treatment
Introduction of Commercial Peanut Roaster Machine: Peanut Dryer,Peanut Dryer Tower,Peanut Dryer Machine,Tower Dryer For Peanut JINFENG DRYING EQUIPMENT CO.,LTD , https://www.jf-graindry.com
The device is mainly used for temperature cooling of the molding sand. The equipment adopts a high-power fan to cool the sand in time, and the device selects the heat exchange mode of wind and water to cool the sand temperature in time, thereby achieving the design purpose of the device. The equipment is mainly composed of four parts: bellows, boiling tank and water cooling box, dust box and fan. The cooling effect is good.
Boiling the characteristics of the cooling bed:
1, the sand into the the multiply boiling cooling bed, easy to sand and air heat exchanger.
2, the hot dry sand, continuous contact with the cooling water pipe in the process of boiling trip, get a good cooling effect.
3, with the filter can remove sand dust and other debris in the sand boiling process.
4, the sand in the boiling process, colliding with each other friction with regeneration.
The boiling cooling bed system has a cooling effect is good, environmentally friendly, conducive to dust, to facilitate the instant cooling of the hot sand and other characteristics.Â
The device is mainly used for temperature cooling of the molding sand. The equipment adopts a high-power fan to cool the sand in time, and the device selects the heat exchange mode of wind and water to cool the sand temperature in time, thereby achieving the design purpose of the device. The equipment is mainly composed of four parts: bellows, boiling tank and water cooling box, dust box and fan. The cooling effect is good.
Boiling the characteristics of the cooling bed:
1, the sand into the the multiply boiling cooling bed, easy to sand and air heat exchanger.
2, the hot dry sand, continuous contact with the cooling water pipe in the process of boiling trip, get a good cooling effect.
3, with the filter can remove sand dust and other debris in the sand boiling process.
4, the sand in the boiling process, colliding with each other friction with regeneration.
The boiling cooling bed system has a cooling effect is good, environmentally friendly, conducive to dust, to facilitate the instant cooling of the hot sand and other characteristics.Â
The machine is a horizontal drum roasting machine that uses direct fire for materials. It is composed of a horizontal drum boiler body, a pan support frame, a frying pan arch, a power transmission part, and a charging and discharging mechanism. The roller pot body is mounted on the support frame of the pot body through the bearing, and the roller pot body can rotate around the roller shaft. Under the direct fire action, the materials contained in the roller pot body are evenly baked, and the roller pot body is also heated evenly. The wok burst accident occurred. The upper part of the arch body adopts a detachable vault for easy maintenance and repair.
Use of Peanut Drying Equipment
The dryer machine is suitable for all roasted seeds and nuts, raw material processing of health products, processing of nutritious raw materials, processing of raw materials for Chinese herbal medicine shops, condiments and spices processing, dried coffee beans, chestnuts, peanuts, melon seeds, walnuts, sesame seeds, beans, rice, hazelnuts, pine nuts, pistachios and other dried fruit foods.
Advantages of Nuts Dryer Machine:
1. Roasting time can set up according to client need or material. When time is on, machine will warn.
2. Heating effect is uniform. Machine is constantly rotated. Back and forth, up and down, all heating well from different direction.
3. It can large increase roasting material oil squeezing rate. Usually equipped with oil press machine.
4. Roasting time is short. Each time it needs about 20minutes. Of course, different situation, roasting time will be a little different. For example, if you won't need the soybean skin crack, then 20 minutes is ok, if you will need the skin crack completely, then need about 40min one time.
5. Reasonable structure, low energy consumption, high efficiency, safety.
6. Low investment costs. Machine price is low, and have many models from small to large, customers can choose according to their needs.