Top High Vacuum Evacuating and Vacuum Pumping System (ZKCC-150)
Disposable Men's Umder Brief Making Machine
This machine adopts advanced ultrasonic welding to non-woven briefs(with or without patch). It is a fully automatic production machine from raw material supplying to finished product output. With PLC system control, high stability and low failure. Import deceleration brake motor effectively reduced defect rate of products. This machine with aluminum alloy rack, the appearance is beautiful and will not get rusted. It can produce the underwear with different sizes by replacing the mold.
Disposable Men's Under Brief Making Machine Disposable Men's Under Brief Making Machine KYD Automatic Mask Machine Factory , https://www.kydultrasonic.com
1. Drying transformer
2. Double stage vacuum (vacuum pump and roots booster pump)
3. Pumping Speed from 108 m3/hr to 4320 m3/hr
ZKCC series vacuum pumping device is a new type of vacuuming equipment developed and produced by our company. It is widely used in the process of producing vacuum condition for various equipment. Its vacuum pressure can reach much lower than any other products in the same field.
Application:
It is widely used in the vacuuming process in the production, installation and maintenance of many electric power equipments, like electric power transformer, capacitor etc., and is also used in the technical process of industrial production, such as vacuum drying, vacuum distillation, vacuum wielding, vacuum coating etc.
It is not suitable for the vacuum process for air and gases containing too much powder, water and oxygen as well as explosive, corrosive, poisonous and chemical substances.
Characteristics:
1. The machine adopts special Roots pump and vacuum pump, so the vacuum pumping speed and pressure, are obviously better than any other devices.
2. Working vacuum range and maximum vacuum degree are superior to other products.
3. It is installed with special vacuum gauge for accurate indication.
4. It adopts automatic vacuum relay for automatic control.
5. Stable and reliable operation, low noise, and easy to move.
Our oil filtration machine:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series TYB Portable light Fuel oil purification machine
Series TYD Vacuum dehydrator
Series TYF Phosphate ester fire-resistance oil purifier
Series PL Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series EFD Explosion protection filtration machine
Series BAM Press filtration system
Series ZKCC Vacuum pumping device
Series COP Cooking oil purification machine
Series CYS Centrifugal oil purification machine
Series JL Portable oil filtering and oiling machine
Series EOR series waste engine oil recycling system
Test equipment
1. Transformer oil Breakdown voltage Tester ( BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5. Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Kinematic Viscosity tester model VST-8 /model VST-2000
7. Flash point tester (open cup) model TPO-3000
8. Flash point tester (close cup) model TPC-3000
9. TAN-DELTA TESTER, 10kV Capacitance and Dissipation Factor Test Set model CDEF
10. CT/PT tester model TPVA-404
11. Transformer turn ratio tester model HYG-II
12. Relaying Protection Tester model TPJB-III
Technical Parameter
ZKCC-30
ZKCC-70
ZKCC-150
ZKCC-300
ZKCC-600
ZKCC-1200
Pumping Speed (L/s)
30
70
150
300
600
1200
Pumping Speed (m3/h)
108
252
540
1080
2160
4320
Ultimate partial pressure (Pa)
5×10-2
5×10-2
5×10-2
3x10-2
3x10-2
1×10-1Â
Ultimate partial pressure  (Torr)
3.7×10-4
3.7×10-4
2×10-4Â
2×10-4Â
2×10-4Â
8×10-4Â
Total Electric Power (kw)
1.85
2.6
5.2
9.5
18.5
33
Main Pump Type
ZJP-30
ZJP-70
ZJP-150
ZJP-300
ZJP-600
ZJP-1200
Front Stage Pump Type
2X-8
2X-15
2X-30
2X-70
2X-70 x 2
2X-70 x 4
Wire size of power supply input ≥(mm2)
1
1.5
3
4
6
8
Power Supply
50Hz 380V (3phase, 4wire)
Intake connection (mm)
DN50
DN80
DN100
DN160
DN200
DN250
Exhaust connection (mm)
DN34
DN60
DN70
DN90
DN70
DN90
Overall Dimensions (cm)
73×46×100
79×55×120
105×60×135
132×78×150
145×86×201
168×100×269