Auto Parts Brake Disc for Auto Accessory
2000mm three/five layers fully automatic
co-extrusion stretch film unit is based on our 30 years` professional skills
and continuous improvement, the whole line comes true fully automatic
production, based on traditional automatic cut film, increase automatic change
paper core and automatic unloading finish film system, comes out four volumes
of 500mm width for one time , ensure stable extrude with high output, high
linear speed and save labour cost.
The film produced by the this winding
stretch film machinery is suitable for the rapid transport or storage, its strong
adaptability, high efficiency and low energy consumption can make goods
integrity to prevent goods from loosening and collapsing during transportation
and being polluted by dust.
*Related Products:wrapping film extruder machine,plastic film extruding machine.
Machinery pictures:
Produced Films
2000MM Black Stretch Film Machine Unit,2000MM Hand Stretch Film Machine Unit,2000MM Plastic Stretch Film Machine Unit,2000MM Packaging Stretch Film Machine Unit CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , https://www.clxmachinery.com
OE NO:
Vehicle  type:
detailed features
 1.Chemical  specification
Item
standards
Brake disc
C
3.1--3.4
3.3
Si
1.9--2.3
1.95
Mn
0.6--0.9
0.75
P
0.15 MAX
0.1
S
0.12MAX
0.08
2.Physical propertities
Item
standards
Brake disc
Tensile strength
245 N/mm2 MIN
268
Hardness HB
187--241 HB
230
microstructure
A 85% MIN+B5%MAX
A 92% MIN
+B 4%MAX
Dynamic balance Disc
260 g-cm  MAX
200 g-cm
Dynamic balance Drum
1300 g-cm MAX
500 g-cm
The brake disc (or rotor) is the rotating part of a wheel's disc brake assembly, against which the brake pads are applied. The material is typically gray iron,a form of cast iron.
The design of the discs varies somewhat. Some are simply solid, but others are hollowed out with fins or vanes joining together the disc's two contact surfaces (usually included as part of a casting
process). The weight and power of the vehicle determines
the need for ventilated discs.The "ventilated" disc design helps to dissipate the generated heat and is commonly used on the more-heavily loaded front discs.
Our advantage as below:
3.-Professional Manufacture ,high-volume environmental foundry electric stoves and foundry production line,output reach 5000 tons per month.
Professional Manufacture
4.-Long Service Life and quality warrantee period & Low noise for brake discs.
5.strictly testing and ways for discs and drums dynamic balance.keep the products stable balance during driving.
100% test brake discs'Â crucial dimension inspection and machining surface. 6.Material: casting Iron
7.Standard: HT-250Â Â raw material G3000 standards.
8.Solid or vented for brake discs style: VENTED Â
9.Packing: Neutral or Color carton.poly woodpallet.
10.Short-term Export Credit Insurance, TS16949 and ISO 9002certificate;
11.many years of export experiance.familiar to many kinds of certifications and government CIQ regulation.many kinds of goverments and Customs documents meantime.
12.short lead time :20 days for a 20'Â container.
13. reasonalbe price and small quantity for first orders.. small quantity order acceptalbe ;Â MOQ at least 10--30pcs;
14.we especially can develop and produce difficult and complex crafts works for brake disc parts,such as especial change some sizes,adjust chemical raw material formulas,brake discs'surface especial treatments(DACROMET,ZINC PLATED,BLACK COLOR) ,Also.Surface drilled holes or scottled lines etc.works..
15. quality warrante period: 1 year or 100000 kliometers.
16.can accept drawing or sample supplying to design or explore new items brake discs or rotors.
Also brake drums too.
welcome enquiry and visit us.Baiwang series Car or truck brake discs and brake drums with more modes and more tems as our best advantage;
Â
We are a global trading company. Our products sell well in Czech, Lithuania, Georgia, Australia, the Middle East, Africa and other regions, countries, and customers in many countries and regions
have formed a trade partnership. The customers who have worked with us agree with our products very much, and agree with our service very much. We also have a professional R & D team.
Â
Car Brake disc /rotor Â
OE NO:
Vehicle  type:
detailed features
 1.Chemical  specification
Item
standards
Brake disc
C
3.1--3.4
3.3
Si
1.9--2.3
1.95
Mn
0.6--0.9
0.75
P
0.15 MAX
0.1
S
0.12MAX
0.08
2.Physical propertities
Item
standards
Brake disc
Tensile strength
245 N/mm2 MIN
268
Hardness HB
187--241 HB
230
microstructure
A 85% MIN+B5%MAX
A 92% MIN
+B 4%MAX
Dynamic balance Disc
260 g-cm  MAX
200 g-cm
Dynamic balance Drum
1300 g-cm MAX
500 g-cm
The brake disc (or rotor) is the rotating part of a wheel's disc brake assembly, against which the brake pads are applied. The material is typically gray iron,a form of cast iron.
The design of the discs varies somewhat. Some are simply solid, but others are hollowed out with fins or vanes joining together the disc's two contact surfaces (usually included as part of a casting
process). The weight and power of the vehicle determines
the need for ventilated discs.The "ventilated" disc design helps to dissipate the generated heat and is commonly used on the more-heavily loaded front discs.
Our advantage as below:
3.-Professional Manufacture ,high-volume environmental foundry electric stoves and foundry production line,output reach 5000 tons per month.
Professional Manufacture
4.-Long Service Life and quality warrantee period & Low noise for brake discs.
5.strictly testing and ways for discs and drums dynamic balance.keep the products stable balance during driving.
100% test brake discs'Â crucial dimension inspection and machining surface. 6.Material: casting Iron
7.Standard: HT-250Â Â raw material G3000 standards.
8.Solid or vented for brake discs style: VENTED Â
9.Packing: Neutral or Color carton.poly woodpallet.
10.Short-term Export Credit Insurance, TS16949 and ISO 9002certificate;
11.many years of export experiance.familiar to many kinds of certifications and government CIQ regulation.many kinds of goverments and Customs documents meantime.
12.short lead time :20 days for a 20'Â container.
13. reasonalbe price and small quantity for first orders.. small quantity order acceptalbe ;Â MOQ at least 10--30pcs;
14.we especially can develop and produce difficult and complex crafts works for brake disc parts,such as especial change some sizes,adjust chemical raw material formulas,brake discs'surface especial treatments(DACROMET,ZINC PLATED,BLACK COLOR) ,Also.Surface drilled holes or scottled lines etc.works..
15. quality warrante period: 1 year or 100000 kliometers.
16.can accept drawing or sample supplying to design or explore new items brake discs or rotors.
Also brake drums too.
welcome enquiry and visit us.Baiwang series Car or truck brake discs and brake drums with more modes and more tems as our best advantage;
Â
We are a global trading company. Our products sell well in Czech, Lithuania, Georgia, Australia, the Middle East, Africa and other regions, countries, and customers in many countries and regions
have formed a trade partnership. The customers who have worked with us agree with our products very much, and agree with our service very much. We also have a professional R & D team.
Â
