How to judge some faults of the ball mill?
Frangible paper seals are typically lower cost and are often used on higher volume applications including retail products, medications, confidential documents, etc.Fragile laser security sticker: this type of holograms is impossible to be removed undamaged. We can make hologram embossing on the surface of the labels and white paper can be used on the back side instead. (You see, nowadays, the conventional surface of this label is silver hologram and the back side is silver hologram as well.) Our special method in making fragile sticker can be conducive to the clean and tidy of the products and can not be counterfeited as well. Frangible Paper Seals,Fragile Laser Security Sticker,Frangible Paper Security Label Shenzhen Tuteng Anti-Counterfeiting Co., Ltd. , https://www.szholographicsticer.com
1. The ball mill bearing heats up and checks for lack of oil.
2, the main bearing and pinion shaft bearing with grease lubrication, reducer and oil lubrication.
3. If there is no shortage of oil, check the concentricity of each part and check the main unit and the transmission part separately. The large bearing seat is not concentric with the hollow shaft, causing the hollow shaft to frictionally generate heat with the bearing gland. The pinion shaft of the drive is not concentric with the bearing housing, causing friction between the drive shaft and the bearing gland. If the reducer and the pinion shaft are not concentric, and the reducer and the motor are not concentric, the bearing will be overloaded and heated. When the hollow shaft is not completely different from the large bearing seat, it may cause difficulty in starting, power consumption during operation, and heat generation of the motor.
4. Therefore, it is very important to ensure the concentricity of each part during installation.