Automatic Pulse Tube Sheet Welding Machine (GTAW/TIG) (PAAWM-80A) - 3
Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.carbongraphitepart.com
Welding source
Model of the welding source: Panasonic TIGSTAR400
Type of power source: IGBT inversion
Welding current: 4-315A
Duty cycle: 315A 60%; 244A 100%
Rated load voltage: 70V
Rated power: 9.5 kw
Fluctuation range of input voltage allows: 380V± 10%
Frequency: 50/60Hz
Welding head
Pipe diameter: Φ 8~Φ 80mm(or as per request)
Pipe wall thickness: 0.5-6.5mm
The maximum length of tube elongation: 10mm
The maximum depth of tube Indentation: 2mm
Feeding Wire adjustable angle: ≤ 45°
Feeding speed: 0.1~1.5m/min
Dia of filler wire: 0.8mm
Rev speed of head: 0.15~6r /min
Welding speed: 50~150mm/min
Tungsten adjustable angle: ≤ 45°
Positioning spindle cooling: Automatic forced cycle water-cooled
Program-controlled system
Welding current adjustment range: 4~315A
Current rise time: 0.1~20s
Current fall time: 0.1~20s
Pulse Frequency: 0.5~500Hz
Duty cycle adjustment range: 10%~50%
Aspirated time in advance: 1~20s
Time lag aspirated: 2-20s
Feeding speed adjustment range: 0~1.5m/min
Welding head rev speed adjustment range: 0.15~6r/min
Built-in storage capacity of 100 Welding Code
Can partition paragraph: 1-6 paragraph
Display: LCD
Gantry and 5D system
Lateral movement stroke: 16000mm
Vertical Movement stroke: 16000mm
Axial movement stroke: 300mm
Technical parameters:
Welding source
Model of the welding source: Panasonic TIGSTAR400
Type of power source: IGBT inversion
Welding current: 4-315A
Duty cycle: 315A 60%; 244A 100%
Rated load voltage: 70V
Rated power: 9.5 kw
Fluctuation range of input voltage allows: 380V± 10%
Frequency: 50/60Hz
Welding head
Pipe diameter: Φ 8~Φ 80mm(or as per request)
Pipe wall thickness: 0.5-6.5mm
The maximum length of tube elongation: 10mm
The maximum depth of tube Indentation: 2mm
Feeding Wire adjustable angle: ≤ 45°
Feeding speed: 0.1~1.5m/min
Dia of filler wire: 0.8mm
Rev speed of head: 0.15~6r /min
Welding speed: 50~150mm/min
Tungsten adjustable angle: ≤ 45°
Positioning spindle cooling: Automatic forced cycle water-cooled
Program-controlled system
Welding current adjustment range: 4~315A
Current rise time: 0.1~20s
Current fall time: 0.1~20s
Pulse Frequency: 0.5~500Hz
Duty cycle adjustment range: 10%~50%
Aspirated time in advance: 1~20s
Time lag aspirated: 2-20s
Feeding speed adjustment range: 0~1.5m/min
Welding head rev speed adjustment range: 0.15~6r/min
Built-in storage capacity of 100 Welding Code
Can partition paragraph: 1-6 paragraph
Display: LCD
Gantry and 5D system
Lateral movement stroke: 16000mm
Vertical Movement stroke: 16000mm
Axial movement stroke: 300mm
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.