Hanging barrel garbage truck safety brake skills
Hanging barrel garbage truck safety brake skills The brakes are critical during the operation or operation of the hanging garbage truck. Superb braking skills need to be summarized. The following is a compilation of the methods and techniques for the brakes of the hanging garbage truck in various situations. 1 , when the garbage truck is stopped in emergency. In the case of roadblocks or pedestrians in front of you that require emergency braking, be sure to press the brake pedal fully. 2 , when the garbage truck turning brakes. The principle is to decelerate and then brake. If you hit the brakes in the direction of the brakes, garbage vehicles will easily lose their focus. But if it is too late to slow down, you can use the brakes briefly depending on the situation. The wet slippery road surface can be decelerated by using the engine brake by lowering the gear, and it is easy to cause tail flick if the brake is suddenly applied. 3 , hanging garbage trucks during bad weather brakes. Emergency braking should be very cautious in bad weather conditions . Otherwise, accidents may occur due to slippery roads or unclear money. 4 , hanging bucket garbage truck bump road brake. Garbage trucks travel on some roads with poor road conditions. Because there are a lot of bumps, the wheels of the vehicles will be suspended when the vehicle passes through. The brakes at this time are not only prone to temporary locking, but also tend to slip. So try to downshift or loose the throttle and use the engine brake. 5 , before hanging the garbage truck completely stopped. Loosen the brakes before stopping the trolleys completely. If you keep on pressing the brakes until the vehicle will produce a relatively large impact immediately before stopping, the trick is to release the brake before the vehicle completely stops, and then tap the brake until the vehicle stops. The above is the method and skill for stopping the bucket garbage truck in various situations. It is hoped that the driver can learn from and master the drivers. "Safe driving and civilized driving" should be our unreserved pursuit and the highest concept. Warp Knitting Related Technologies Warp knitting is a type of knitting where the yarns are fed in parallel to the fabric's length. This type of knitting requires specialized equipment and technologies to produce high-quality fabrics. Some of the related technologies used in warp knitting include:
2. Tumbling machine: This machine is used to soften the fabric and improve its texture. The tumbling machine is ideal for producing fabrics that require a soft and smooth feel.
4. Antipilling machine: This machine is used to prevent the fabric from pilling. The antipilling machine is ideal for producing fabrics that require a long lifespan and durability.
5. Mother yarn and mono yarn: These are the two types of yarn used in warp knitting. The mother yarn is used to create the base structure of the fabric, while the mono yarn is used to create the pattern or design on the fabric.
Warp Knitting Related Technologies suzhou cotex international Co.,Ltd , https://www.macanol.com
1. Slitting machine: This machine is used to cut the fabric into smaller widths. The slitting machine is essential in producing fabrics with different widths for various applications.
3. Scutching Machine: This machine is used to remove impurities from the fabric. The scutching machine is essential in producing high-quality fabrics that are free from impurities.
In summary, the above technologies are essential in producing high-quality fabrics using warp knitting. They help to improve the texture, durability, and overall quality of the fabric.